Ultra-Reliable Windproof Covers for Vegetable Beds

, written by Barbara Pleasant us flag

Lettuces under a row cover

From December through March, I expect to be awakened in the night at least once a week by howling winter winds. Gusts above 40 mph (64 kph) will blow from time to time, but thanks to the use of the right hardware, the plastic and fabrics I use as covers for vegetable beds don’t go flying off into the trees.

“Wiggle
Wiggle wire presses plastic into metal channels so it won’t tear or pull out

Securing Plastic with Wiggle Wire

Wind regards sheet plastic as a toy, and my efforts to secure plastic to frames using staples or weights always ended badly. Three years ago, Roger built frames for four of our permanent beds by bending conduit pipe from the building supply store. Then he outfitted them with metal U channels for wiggle wire. Also called spring wire or zigzag wire, wiggle wire was invented in Japan 20 years ago, and there is nothing like it for holding plastic. Widely used to attach plastic to small greenhouses and high tunnels, wiggle wire also can be used on a small scale to make covers for vegetable beds. Kits to equip beds or tunnels of any size with wiggle wire and matching channels are widely available on the internet.

Wiggle wire holds plastic by pressing it into metal channels that are mounted on boards. After screwing the channels into boards, you install wiggle wire by rocking the wire up and down in the U channel while catching the edge of the plastic, a move that’s quickly mastered with a little practice. On a still day, I can turn a resting bed into a greenhouse in fifteen minutes by securing three sides with wiggle wire at the bottom and the top. The I add a few snap clamps to tighten down the front, the only side that opens.

“Plastic
Wiggle wire and snap clamps create an instant greenhouse for late winter planting

The first salad garden of the season gets planted under such a cover in February, with some space allotted to cold-tolerant seedlings that are ready to get adjusted to life outdoors. We start eating lettuce from the greenhouse bed three weeks before our last frost arrives. When the weather warms, I take off the plastic and wiggle wire and store them until they are needed the following winter.

Snap Clamps for Row Cover

Cold-hardy crops like spinach and kale don’t need to be covered with plastic in winter, but they do benefit from mid-weight row cover (garden fleece) to tame the wind and hide the plants from deer. Some wind passes through row cover, which makes it less likely to lift off compared to plastic. Rather than attach row cover with wiggle wire (which is completely doable), I’ve found that it stays put just fine attached to the pipe frame with plastic snap clamps.

“Alt
Snap clamps do a good job of holding row cover over a bed of overwintering spinach

If you have bed frames structured with metal or PVC pipe, you can make your own snap clamps from pieces of old garden hose, slit down the side. Or, buy snap clamps that fit the diameter of your pipe. We bought two different kinds, and I like the brightly colored ones because they are easy to find when dropped in the grass. In addition to using snap clamps to install row cover over vegetable beds, they are useful for securing shade covers or bird netting when needed during the growing season.

“Weighing
Boards are used to weight the edges of a tunnel that protects spring crops from wind and hail

Weight Tunnel Edges with Boards

When winter starts winding down, about six weeks before my last frost, I fill a row with lettuce, cabbage, parsley and other cool-season crops, and cover it with a row cover tunnel held aloft with wire hoops. The tunnel protects the veggies from hail and varmints, and long boards used as weights for the edges keep it from blowing off in gusty spring storms. In my experience, weights made from bricks or water-filled plastic jugs are fine for securing the ends of row cover tunnels, but not the long edges. Between the weights, wind finds places to lift the fabric and set it free. Burying the edges is messy and makes the tunnels hard to open. Long boards make much more dependable weights that require minimal monitoring. Lifting the cover for weeding, and then putting it back in place, is fast and easy.

Windproof covers for vegetable beds require good planning, but with the help of wiggle wire and snap clamps, it can be done.

< All Guides

Garden Planning Apps

If you need help designing your vegetable garden, try our Vegetable Garden Planner.
Garden Planning Apps and Software

Vegetable Garden Pest Warnings

Want to Receive Alerts When Pests are Heading Your Way?

If you've seen any pests or beneficial insects in your garden in the past few days please report them to The Big Bug Hunt and help create a warning system to alert you when bugs are heading your way.

Show Comments



Comments

 
"That whole 'wiggle wire / conduit channels' needs a detailed 'instructable'. The photos and description were of little help in trying to replicate this."
G on Friday 2 December 2022
"G, I hope you will look at one of the many videos on the internet that explain wiggle wire better than I can in a few sentences. The Bootstrap Farmer site, or their YouTube channel, has several short videos showing wiggle wire being installed and removed. "
Barbara Pleasant on Saturday 3 December 2022
"Thanks, Barbara - I'll check out the Bootstrap Farmer."
G on Sunday 4 December 2022

Add a Comment

Add your own thoughts on the subject of this article:
(If you have difficulty using this form, please use our Contact Form to send us your comment, along with the title of this article.)

 
   
(We won't display this on the website or use it for marketing)



Captcha


(Please enter the code above to help prevent spam on this article)



By clicking 'Add Comment' you agree to our Terms and Conditions